Guides » Indications for the laying

Instructions for dry laying on plastic supports

For the 25x50 format the laying on plastic supports is not allowed.

Raised pavings
This type of laying is carried out on special plastic supports, placed on protection coverings, offering considerable advantages, such as:
• a rapid installation;
• a better sound/heat insulation;
• an easy maintenance of the waterproof mantle;
• a practical access to the underground, without carrying out any demolition.

Laying on plastic supports
Arrange in advance the raised paving with the Morpho supports.
The supports can be used with tiles having different thicknesses. For a detailed information look at list “Regulations raised Pavings"
A minimum slope of 1,5 % must be provided in the most unfavorable situation, in order to guarantee the correct runoff of rain water.
These drains have to be positioned with a suitable level in order to avoid the stagnation of water. They must have also a diameter of not less than 10 cm (free inside opening) with 1 drain each 50 sq m terrace.

Laying on plastic supports
Arrange in advance the raised paving with the Morpho supports.
The supports can be used with tiles having different thicknesses. For a detailed information look at list “Regulations raised Pavings"
A minimum slope of 1,5 % must be provided in the most unfavorable situation, in order to guarantee the correct runoff of rain water.
These drains have to be positioned with a suitable level in order to avoid the stagnation of water. They must have also a diameter of not less than 10 cm (free inside opening) with 1 drain each 50 sq m terrace.

Adjustment
During the laying control that the slabs lean in the 4 angles. In case of vibrations set the support by introducing the adjustment screw in the suitable thread. Rotate clockwise till reaching the perfect planarity.

Positioning of the central support (optional)
Place the central support in the point corresponding to the centre of the slab.

Use of the glue (optional)
Apply MaspeKimik in the suitable basin of the central support till its complete filling up.
In case that more stability is needed, repeat the operation also iin the basins arranged beforehand of the Morpho support.

Joint-sealing (optional)
Put the joint in the cleft between the slabs by using the tool. Even up the whole length and cut the joint to measure of the short clefts.

Cleaning
When the paving has been finished, carry out a cleaning of the yard.
In case of obstinate dirt use MaspeClean as detergent.
In particular cases we suggest the use of a monobrush polishing machine to lay the MaspeClean and to remove mechanically the dirt.
Otherwise, scratch the paving by using a manual brush.

Related products

Require informations
Consult the text for privacy